Using Loop Mode

Loop Mode enables you to capture video that’s activated by a trigger. A trigger can
either be the shutter button or a shock to the camera such as the recoil from a rifle.
TRIGGER TYPE
You can set the Trigger to be activated by the Shutter button or a sensor.
(NOTE: The Sensor feature is not available on the Aurora Sport or Black.)
To set the Trigger Type:

• Rotate the Settings Dial to Loop Mode.
• Press SET to access the Loop menu.
• Toggle right on Trigger Mode to select Shutter or Auto.
• Press SET to select and SET again to exit.
  

TRIGGER MODE
You can set the Trigger Mode to three different timing options:
Before – records 30 seconds before the trigger
Middle – records 15 seconds before and 15 seconds after the trigger
After – records 30 seconds after the trigger
To set the Trigger Mode:

• Rotate the Settings Dial to Loop Mode.
• Press SET to access the menu.
• Toggle right on Trigger Mode and press SET to select Mode and SET again to exit.

The Trigger Mode and settings will be visible in the Viewfinder.
NOTE: THE LOOP MODE HAS THE SAME OPTIONS AS VIDEO MODE: EIS | FRAME RATE | RESOLUTION | HDR