Charge the Battery first:
Remove the Viewfinder by pulling down the Viewfinder release button and pulling the Viewfinder straight out.
-Insert the battery into its slot.
-Plug the included USB cable into the micro USB port.
-To access the USB port, pull out the rubber flap under the Settings dial.
Charge via a powered-on laptop or desktop PC.
It takes about two hours to fully charge the battery and the camera needs to be turned OFF to charge. A green light will flash on the camera and turn off when complete.
A fully charged battery is generally good for about two hours of continuous video recording.
CLICK HERE to view a video about charging the battery.
The Aurora battery is a standard 'Panasonic' type NP-50 camera battery. Varieties of NP-50 batteries can be found on Amazon. For an example: Click HERE.
NOTE: SIONYX does not manufacture, sell, or support the NP-50 battery on Amazon referred to above. Please use responsibly and at your own risk.